|
The
Parker Y-300 and Y-400 Probe Lights are molded inspection lights designed
to fit the B-300 and DA-400 Contour Probes respectively. The lights produce substantial
close-in illumination for magnetic testing.
The Parker Y-300T High Intensity Probe Light
is a molded inspection light with 2 bulbs designed to fit the B-300
Contour Probe.
The Parker Probe Lights operate from the
induction of the AC magnetic field produced by the Yokes. A small coil
wound within the molded light housing produces 12 volts AC which operates
the small cylindrical shaped bulb. There are no wiring connections
necessary for installation. It should be noted that the lights operate in
the AC mode only.

Y-300 and Y-400 Yoke Lights

Y-300T High Intensity Yoke Light
The Y-300 and Y-300T Probe Lights
are
designed to fit the rear leg housing of the Parker B-300 Contour Probe.
The Y-400 is designed to fit the rear leg housing of the DA-400
Contour Probe. All are molded from durable glass filled nylon which is
extremely resistant to shock, wear and chemicals. The bulbs are an
automotive dome light bulb which may be available from local sources.
Replacements are also available from Parker at minimal cost.
|